Website Disclaimer

Material published at cmmcalibrationindianapolis.com is general and descriptive, meant to help a requester understand what can be arranged and what a request should contain. Not one part of it functions as a technical specification, an engineering opinion, or a certificate of any kind.

Last updated 18 October 2026.

Every measurement result carries an uncertainty. The result is meaningful only when it is read together with three things:

• the measurement uncertainty stated on the certificate
• the conditions under which the measurement was made
• the method used

Statements of conformity are a pass or fail against a tolerance. Where one is issued, it rests on a decision rule agreed before the work is performed. Nothing on this website states or implies a decision rule, an uncertainty figure, or a conformity outcome for any item.

Results are reported only on the certificate or report issued by the laboratory that performed the work, in the form in which it is issued. No page of this website, and no email or verbal statement made while arranging work, is a certificate of calibration, a report of results, or an amendment to either. The certificate is valid as a complete document and should be read as one.

ISO/IEC 17025:2017 is what the work described here is carried out under. Accreditation, if referenced, belongs to the laboratory performing the work, reaching only as far as the measurements listed in its published scope. Work that sits outside that published scope is still performed, reported as non-accredited work, and identified as such on the certificate.

No part of this site is engineering, metrological, legal or regulatory advice. Whether an instrument is fit for a particular use is not a question these pages answer, and they must not be relied on to answer it. External links are offered for convenience only, and their content is not controlled or endorsed. For action taken on the basis of website content alone, no liability is accepted, to the extent permitted by law.